JISHAN REPAIR HOLLOW NO.1 HOLLOW TILES REPAIR GLUE-ANTI-SAG
(Anti-sag type) Suitable for wall tile hollow repair glue, wall tile hollow grouting, wall tiles injection
* Also suitable for tiles falling off and then using this glue to stick it back
- Hollow Tile Repair
- Rapid Curing
- Solid after Curing
This product consists of Components A and B, which, when mixed in the right proportions, form a liquid. This product features a solvent-free formula without adding any low-boiling solvents such as benzene, toluene, or xylene. With the advanced hybrid modification technique, the tensile shear bonding strength and flexibility of the product have been significantly enhanced.
Additionally, the product boasts a low shrinkage rate and strong, adhesion, making it suitable for repairing hollow tiles of high density and low water absorption.
- Description
Description
Scope of Application
This product is designed for repairing and fixing hollow spots behind both indoor and outdoor tiles to effectively prevent any further debonding and hollowing of the tiles.
Application Process
Take out Components A and B and mix them according to the specified proportion. It’s important to stir them well, as any uneven mixing can affect the product’s performance. Pour the well-mixed product into the injection equipment and inject it into the areas that need repair. Apply pressure from above. Once the product has fully cured, simply remove the pressure. This product should be mixed in small quantities when being used. The working time is approximately 15 minutes at room temperature (25°C), with a curing time of 24 hours. In low-temperature conditions, the working time extends to about 30 minutes, with a curing time of 48 hours. If the product is to be used in harsh environments or for the repair of special materials, please consult our technical team for guidance.
Precautions
- This product is not for consumption. If it accidentally comes into contact with your eyes or sensitive areas of your body, rinse with plenty of water and seek medical attention immediately.
- This product needs a full seven days to dry completely. During this time, no weight shall be applied on the surface.
- This product has an exceptionally strong adhesive bond. Once it touches any unwanted surface, be sure to clean the area with alcohol immediately, as it becomes impossible to remove after it cures.
Packaging and Storage
- This product should be packaged and transported in sealed containers as a general building During transportation, precautions should be taken to avoid exposure to sunlight and rain, prevent squeezing and collisions, and ensure the packaging remains intact.
- The package must be stored and transported in an upright It should be kept in a well-ventilated, dry place, away from direct sunlight, with a temperature range of 5°C to 35°C.
- Shelf life: 12 months
Standards
GB/T 36797-2018
Statement
Please follow the instructions in the user manual for proper construction. We will not be held responsible for any losses resulting from your improper use. For any inquiries, please consult your local dealer or our technical service department.
