JISHAN REPAIR TWO-COMPONENT LARGE PLATE TILES ADHESIVE
Specially for large tiles, the back of the tiles lay roughened, the wall lay roughened, the floor lay roughened, the tiles can be immersed in water for a long time, and are heat-resistant Suitable for floor and wall tiles, granite, marble, and paver stone etc.
- Instant Application
- Water Resistant and Weatherproof
- Ultra-Strong Bond
- For Walls and Floors
Jishan Repair Large Plate Adhesive is a two-component, eco-friendly product made up of powder and liquid materials. When mixed, it forms a creamy consistency that boasts strong adhesion and is non-toxic. It tackles the challenges of low water absorption in glazed tiles, marble, and granite, as well as issues like delamination, hollow tiles, and peeling.
- Description
Description
Scope of Application
This product is suitable for the surface pretreatment of materials such as glazed tiles, antique tiles, marble, and granite with low water absorption rates, as well as for ceramic tiles with dimensions up to 1200mm x 2700mm.
Features
- Water serves as the dispersing medium, featuring an eco-friendly formula.
- Rolling and roughening application to enhance the product’s contact surface.
- High thixotropy for easier application.
- The surface is well-treated for tiling, ensuring a strong bond. Excellent adhesion and environmentally friendly.
Instructions for Use
- Backside treatment of tiles:
The back of the tiles should be clean and free of grease, release agents, or other impurities. - Preparation of adhesive:
First, pour the liquid into a bucket. While stirring it, gradually add the powder. Use an electric mixer to blend it well until there are no lumps. The first mixing should take about 2-3 minutes. After that, let the mixture sit for 10 minutes to rest. Before you start the rolling application, give it another stir for 2-3 minutes. - Techniques:
Dry application: Use a roller to evenly roughen the back of the tiles with the prepared slurry. Once the roughened layer is completely dry, apply the cement mortar or tile adhesive over the two-component roughened layer (with a thickness of 5-10mm).
Wet application: Use a roller to evenly roughen the back of the tiles with the prepared slurry, and then apply the cement mortar or tile adhesive over the two-component roughened layer (with a thickness of 5-10mm). It’s important to make sure that the wet application does not disturb the bonding layer.
Precautions
- Once opened, the product should be used up as soon as possible. The container should be immediately sealed with the lid after being opened, When the application is completed or stopped mid-way, cleaning agents should be used to clean the tools, which should be maintained in good condition during the application process.
- This product should be kept dry during transportation, storage and use, and should never be left uncovered in the open air.
- During application, please take necessary safety measures. Wear a mask and goggles to prevent the material from contacting the operator’s body.
Standards
T/CBMF 87-2020
Precautionst
- This product should be packaged and transported in sealed containers as a general building During transportation, precautions should be taken to avoid exposure to sunlight and rain, prevent squeezing and collisions, and ensure the packaging remains intact.
- The package must be stored and transported in an upright position and in a cool, dry place between 5°C and 35°C
- Shelf life: 12 months
Statement
Please follow the instructions in the user manual for proper construction. We will not be held responsible for any losses resulting from your improper use. For any inquiries, please consult your local dealer or our technical service department.
