JISHAN REPAIR SEAWEED POWDER
1kg seaweed powder mixed with 130kg water and stirred evenly, After mixing water, it can be used (This product seaweed powder cannot be used alone it must be added with water)
*Suitable use this Seaweed pulp mix with cement slurry to plastering brick wall and concrete wall with screeding cement slurry flooring.
*Also suitable mix with cement to lay floor and wall tiles, granite with marble.
- Highly elastic and crack-resistant
- Cold and heat resistant
- Eco-friendly and odorless
Jishan Repair seaweed powder has superior water retention and stickiness, which can fully complete the hydration reaction of cement, increase the adhesion and enhance the compactness of the structure. This results in walls that are less prone to peeling, cracking, and water seepage. When seaweed powder is added to cement slurry, it improves the stability, increases the consistency, enhances lubricity, and strengthens suspension and dispersion, making it less prone to sedimen-tation and easier to handle during mortar operations.
- Description
Description
Usage Method
First, mix 1kg of seaweed powder with 150kg of water (1:150) to form a glue solution. Then, mix this glue solution with cement at a weight ratio of 1:4 to prepare the mortar. After allowing it to stand for 3-5 minutes, and ensuring that the substrate is clean and free of debris, you can proceed with the scraping and application process.
Note: For the construction of concrete interface treatment, mix the glue solution with cement at a weight ratio of approximately 1:2.5 to form a paste. After allowing it to stand for 3-5 minutes, and ensuring that the concrete surface is clean and free of debris, apply the paste by brushing or spraying onto the concrete surface.
Precautions
- Depending on the range of use, the influence of climatic and environmental factors, and the desired viscosity of the glue solution, the ratio of seaweed powder to water or the ratio of the prepared adhesive liquid to cement can be adjusted.
- To ensure optimal construction results, please read the product instructions carefully before construction.
- This product is environmentally friendly and does not fall into the category of hazardous flammable materials. It can be stored normally and transported safely.
Packaging and Storage
- Use sealed packaging, and transport according to general building materials. Transport should prevent sunlight and rain, avoid extrusion collision, and keep the package intact. The package must be stored and transported in an upright position and in a cool, dry place between 5°C and 35°C.
- Shelf Life: 3 years
- Weight: 1kg
Statement
Please follow the instructions in the user manual for proper construction. We will not be held responsible for any losses resulting from your improper use. For any inquiries, please consult your local dealer or our technical service department.
